GRABO®'s Technology And Technical Specification
GRABO® innovators work with a huge variety of unique technological patents. To lead the market, our team ensures our products offer cutting-edge convenience, power and accessibility. Below, we will take a detailed glance at some leading technical capabilities of our most popular tools, lines and other services.
GRABO® H Specs (NGH-V2)
Power System & Runtime
Battery platform
7.4V Li-ion (6× AA 1.5V or 2× 18650 3.7V)
Charger input voltage
100-240 VAC, 50/60 Hz
Battery charging time
N/A
Non-stop running time (full charge)
N/A
Running cycles (full charge)
340 ON-OFF cycles (10 seconds)
Stand-by mode (charge hold)
25 days
Handling Dimension and Capacity
Length
10.94 in (278 mm)
Width
6.38 in (162 mm)
Height
4.72 in (120 mm)
Weight (with battery)
2.6 lbs (1.2 kg)
Working Load Limit (WLL)
165 lbs (75 kg)
Max Lift
375 lbs (170 kg)
Pump & Vacuum Performance
Brushless pump output
10 W rated power
Air flow
7 L/min
Vacuum control
Max vacuum 11.6 psi (0.8 bar / 80 kPa)
Pump service life
100,000+ ON-OFF cycles / 800+ hrs continuous
|
Material
|
Perpendicular Hold
|
Parallel Hold
|
|---|---|---|
| Glass | 375 Lbs (170 kg) | 265 Lbs (120 kg) |
| Ceramic Tiles | 375 Lbs (170 kg) | 265 Lbs (120 kg) |
| Metal | 242 Lbs (110 kg) | 242 Lbs (110 kg) |
| Plastic | 220 Lbs (100 kg) | 220 Lbs (100 kg) |
| Wood | 220 Lbs (100 kg) | 143 Lbs (65 kg) |
| Rough Slate | 176 Lbs (80 kg) | 176 Lbs (80 kg) |
| Rough Concrete | 176 Lbs (80 kg) | 176 Lbs (80 kg) |
| Dry Wall | 165 Lbs (75 kg) | 143 Lbs (65 kg) |
Operating & Compatibility
Working temperature
32°F - 140°F (0°C - 60°C)
Applicable surface type
Peak/valley heights < 0.1 in (3 mm), arc < 5°
Additional features
Compact form factor, 1 seal included
Notice
GRABO® H (NGH-V2) was tested under ideal conditions. The GRABO<sup>®</sup> is not designed or intended for climbing or to support a person's weight. Do not attach GRABO<sup>®</sup> to glass thinner than 6mm thick — damage can occur.
GRABO® H Adhesion To Rough Surfaces
GRABO® H suction cup technology offers incredible adhesion to awkward, often unmanageable surfaces. Traditionally, standardised suction cups require clean, flat surfaces for perfect adhesion and hold. For example, airtight panels and glass panes usually fulfil such a brief. GRABO® H technology, meanwhile, offers incredible suction and lifting power on etched, rough and otherwise irregular surfaces.
The GRABO® H is rated for surfaces with peak/valley heights up to 3 mm (0.1 in) and an arc under 5 degrees. Therefore, it can work with the vast majority of patterned surfaces such as tiles and various construction standards. Of course, each case will vary and will depend on the exact geometry of roughness on any given surface.
However, the GRABO® H commitment to adhesion means you can effectively pick up more than a clean panel or two. Why restrict matters?
.png)
